AMSOIL Chain Lube

AMSOIL Chain Lube

AMSOIL Chain Lube penetrates into pins and rollers for smooth performance and long chain life. Convenient spray valve helps ensure hard-to-reach components are protected from heat, water and dirt.

Outstanding Protection for Motorcycle Chains

• Provides outstanding wear and corrosion protection for all types of chains and sprockets
• Helps extend chain life
• Leaves a protective coating that will not fling off or attract dirt
• Easy application
• Fast-drying

Product data sheet for full details on AMSOIL Chain Lube

Why Chains Need A Purpose-Built Lube

High Load, Constant Motion

Your drive chain carries every bit of torque your engine makes. Every time you roll on the throttle, those small contact patches between pins, bushings and rollers are hammered with load. Without a good film of lubricant in those tight gaps, metal wears quickly and the chain stretches.

A proper chain lube must:

• Flow into the tiny clearances inside the chain
• Stay in place at speed
• Protect from rust, moisture and road grime
• Work with rubber seals in O-ring and X-ring designs

AMSOIL Chain Lube is engineered with those exact jobs in mind, which is why it’s marketed for “all types of chains and sprockets” and praised for deep penetration and long-lasting protection.

Why Not Just Use Gear Oil Or Random Spray Lube?

Gear oil or light household sprays might seem okay at first, but they have problems:

• They fling off easily at motorcycle chain speed
• Many attract grit, which turns your chain into a grinding paste
• Some solvents can attack rubber seals over time

AMSOIL Chain Lube is designed specifically to penetrate, then stay put without pulling in extra dirt and dust, and it’s safe for O-ring style chains.

---

Key Features Of AMSOIL Chain Lube

Deep Penetration Into Pins And Bushings

The formula is built to creep into the critical wear zones inside the chain – the pins and bushings. Once it penetrates, it leaves a durable lubricating layer that cushions metal-to-metal contact.

Things That It Helps:

• Reduce chain stretch
• Maintain smoother operation
• Extend the life of both chain and sprockets

Protective Coating That Won’t Fling Off

One of the standout claims for AMSOIL Chain Lube is that it leaves a coating that does not fling off easily.

Real-world reviewers back this up, saying it stays on the chain with “almost zero fling” even after riding, and keeps wheels and bodywork much cleaner compared to other chain sprays.

Doesn’t Attract Dirt, Dust Or Sand

Some chain lubes stay sticky forever, and everything from sand to road dust clings to them. AMSOIL Chain Lube is formulated to resist grit build-up, so it doesn’t turn into a black abrasive paste on the chain.

That’s especially important for:

• Dirt bikes and motocross
• Dual-sport and adventure bikes on gravel roads
• ATVs and UTVs in dusty or sandy terrain

A cleaner chain means less wear, smoother running and less cleanup time.

Outstanding Wear And Corrosion Protection

The product description emphasizes wear protection and corrosion resistance for chains and sprockets.

This matters when:

• You ride in rain, mud or salted winter roads
• The bike sits outside or in a damp garage
• Your chain sees big power spikes and aggressive riding

By shielding metal surfaces from moisture and oxygen and keeping a lubricating film in place, AMSOIL Chain Lube helps chains last longer and sprocket teeth stay sharp.

Fast-Drying, Easy-To-Use Aerosol

AMSOIL Chain Lube comes in convenient aerosol cans (4.5-oz and 11-oz sizes), with a formula that dries quickly after application.

Benefits:

• Easier, neater application on the inside of the chain
• Less chance of slinging wet lube during the first ride
• Simple to carry in a gear bag or toolbox

Riders consistently call it “not messy” and appreciate how little is needed to do a good job.

Safe For O-Ring And Sealed Chains

Dealer/wholesale descriptions highlight that AMSOIL Chain Lube is safe for O-rings, unlike some harsh sprays that can attack rubber over time.

That makes it suitable for:

• O-ring chains
• X-ring and Z-ring chains
• Standard non-sealed chains

You get maximum lube where it’s needed without compromising the seals that hold factory grease inside the chain.

---

What Vehicles And Equipment Use AMSOIL Chain Lube

Street Motorcycles

AMSOIL positions this as “outstanding protection for motorcycle chains,” and many reviews mention sport bikes, naked bikes and touring machines.

Ideal use cases:

• Daily commuters that see rain, dust and stop-and-go traffic
• Sport bikes that experience high chain speeds and hard acceleration
• Cruisers and standards where quiet, smooth drivetrains are appreciated

Owners often note that it:

• Keeps the chain quiet
• Reduces mess on wheels and bodywork
• Lasts well between cleanings

Dirt Bikes And Motocross

Dirt riders are tough on chains: mud, sand, repeated washings and hard landings all accelerate wear. AMSOIL Chain Lube’s low dirt attraction and strong protection make it a natural fit for MX and off-road use.

When combined with AMSOIL Dirt Bike oils and other powersports products, it supports a complete off-road maintenance program.

Dual-Sport And Adventure Bikes

Adventure bikes and dual-sports often see:

• Long highway stretches
• Gravel and dirt roads
• Wet weather and stream crossings

A lube that resists fling-off and doesn’t attract dust is a big advantage. Riders who use AMSOIL Chain Lube report reliable performance before long rides or track days, and fewer re-applications needed compared to some thinner lubes.

ATVs, UTVs And Side-By-Sides

While a lot of ATVs and UTVs are shaft or CVT driven, there are sport quads and machines with exposed chains that benefit from a high-quality chain spray. Because AMSOIL markets Chain Lube alongside its ATV/UTV products and cleaners, it’s clearly designed with this environment in mind as well.

Use cases:

• Sport quads run in sand or on tracks
• Chain-drive utility ATVs used for chores
• Farm and ranch machines exposed to mud, dust and water

Bicycles And Mountain Bikes

Customer reviews mention using AMSOIL Chain Lube on mountain bike chains, praising its staying power and low fling, even though it’s primarily marketed for motorsports.

For bicycle use, a light application and good wipe-down is usually enough, since pedal-powered chains don’t need as heavy a film as a motorcycle.

Other Creative Uses

Because it’s a precise, non-flinging spray, some users also apply AMSOIL Chain Lube to other moving parts:

• Garage door chains and mechanisms
• Tractor snowblower chains and linkages
• Hinges and sliding hardware that need staying power

Reviews specifically mention quieter garage doors and well-lubed snowblower chains in cold conditions.

---

How To Use AMSOIL Chain Lube Effectively

(General info only – always follow your owner’s manual and AMSOIL’s instructions.)

Step 1: Clean The Chain

For best results, start with a clean chain. Many riders use:

• A dedicated chain cleaner or mild degreaser
• Soft brushes to scrub off old lube and grit

AMSOIL Brake and Parts Cleaner is often paired with Chain Lube to cut through old grease and grime quickly.

Let the chain dry fully after cleaning so the new lube can penetrate properly.

Step 2: Warm The Chain Slightly

A short ride or spinning the wheel manually can help warm the chain a bit. Warm metal and seals allow the lube to creep in more easily, especially around O-rings and bushings.

Step 3: Apply On The Inside Run

• Put the bike on a stand if possible
• Aim the nozzle at the inside of the lower chain run, near the rear sprocket
• Slowly rotate the wheel and apply a light, even spray

Cover one full rotation of the chain. Because AMSOIL Chain Lube goes on efficiently and “a little goes a long way,” you don’t have to soak it heavily.

Step 4: Let It Set, Then Wipe Excess

Give the lube time to penetrate and for the solvent portion to flash off. The formula is fast-drying, so this doesn’t take long.

Afterward, wipe away any heavy excess on the outer plates with a clean rag. This:

• Reduces fling even further
• Helps prevent dust sticking to wet spots

---

How Often Should You Re-Apply It?

There isn’t a single “magic” interval, but a few factors help decide:

• Wet, muddy conditions: Lube more often – sometimes after every heavy off-road ride
• Dry street riding: Many riders clean and lube every 300–600 miles
• Track use or racing: Chains may be serviced before each event or day on the track

Because AMSOIL Chain Lube has strong staying power and doesn’t fling off easily, you can often stretch intervals farther than with thin lubes – as long as the chain still looks and feels well-lubricated.

A good rule of thumb: if the chain looks dry, feels noisy, or you’ve ridden in nasty conditions, clean and lube it.

---

Pairing AMSOIL Chain Lube With Other AMSOIL Products

Engine Oils For Motorcycles And Dirt Bikes

For a complete package, many riders pair AMSOIL Chain Lube with AMSOIL motorcycle and dirt bike engine oils, such as:

• Metric Motorcycle Oils
• V-Twin Motorcycle Oils
• Dirt Bike Oils

These oils are formulated for wet-clutch, high-rpm engines and are often listed in the same powersports categories as Chain Lube.

Cleaners And Protectants

From AMSOIL’s general-purpose cleaners and protectants, these often sit right next to Chain Lube:

• Brake and Parts Cleaner – for chain and brake cleanup
• Mudslinger® Mud and Dirt Repellent – keeps plastics and metal easier to wash
• MP Metal Protector & Heavy-Duty Metal Protector – rust prevention on non-chain metal surfaces

Using these around the bike or ATV means the whole machine is easier to maintain, not just the chain.

Suspension Fluids And Other Powersports Products

Riders who are particular about chain care are often just as picky about suspension and driveline fluids. AMSOIL Shock Therapy suspension fluids, ATV/UTV oils, and powersports coolant help complete a fully-synthetic, high-performance setup for your entire vehicle.

---

Real-World Feedback From Riders

The AMSOIL Chain Lube page shows a 5-star average rating based on dozens of verified reviews.

Owners say things like:

• “Works great, no mess compared to others I’ve used.”
• “Use this on both my race bikes before hitting the track.”
• “I use this on my mountain bike chain… doesn’t fling off.”
• “My garage doors are so much quieter now, my bike chains stay lubed and clean.”

Common themes in the reviews:

• Low fling and less mess
• Strong staying power, even in cold weather
• Versatility across different chains and household uses
• A sense that “a little goes a long way”

That mix of performance and convenience is exactly what you want from a premium chain spray.

---

Is AMSOIL Chain Lube Right For You?

Choose AMSOIL Chain Lube if you:

• Run a motorcycle, dirt bike, ATV, UTV or bicycle with a chain drive
• Want a lube that penetrates deeply but doesn’t fling all over your machine
• Ride in dusty, sandy or muddy conditions where grit is a problem
• Need strong protection against wear, rust and corrosion
• Prefer a fast-drying, easy-to-apply aerosol you can keep in your garage or gear bag

When you combine AMSOIL Chain Lube with proper cleaning and sensible service intervals, your chain and sprockets can last longer, run smoother and need less constant attention. It’s a small maintenance step that pays off every time you roll on the throttle.